電泳顯示器具有不易變化的反射率與雙穩態的特性，因此被視為是電子紙亦或電子閱讀器的最佳解決方案。在不同使用條件下的電子紙，其所需的畫面解析度、速度與對比度都不盡相同，因此電子紙設計者需採用各種電泳材料與不同解析度的主動式矩陣背板來設計出各類型的電子紙，甚者，驅動波型也需因應於各種不同的層面，並與環境溫度進行校調。為了設計出簡易的驅動波型對照表設計架構，因而設計出一個可應用於主動式矩陣電泳顯示的控制器，此控制器可以提供區域影像更新，並可以即時對影像做半色調的處理。電泳顯示控制器已在FPGA上實現，其效能也在許多電泳顯示器測試平台上獲得驗證。
另一方面，由於電泳顯示器僅能達到16色灰階的解析度，若直接顯示其畫面品質很難被大眾所接受，因此我們針對半色調演算法進行探討，並開發出一套影像處理工具，將影像作對比強化與半色調的處理後，影像的視覺品質顯著的提升，藉以克服低解析度的缺點。

Electrophoretic displays (EPD) have become the main solution to electronic paper because of its invariably reflective and bistable properties. With different requirements of display resolution, speed, and contrast ratio, E-paper designers may adopt different types of electrophoretic material and active matrix backplane for building the system. The driving waveforms should be also customized for accommodating different application specifications and environment temperature. In this paper, we present a configurable EPD controller which can support various application specifications. In addition to providing a new architecture of compacted waveform lookup tables, the controller supports partial image update and integrates a real-time halftoning engine for improving image quality. The design has been implemented on an FPGA and tested with several real EPDs.
On the other hand, due to the electrophoretic display has only 16 gray scales resolution, if direct display an image on EPD, the image quality is difficult to be accepted by the user. We focused on the halftoning algorithm and developed an image processing tool with image contrast enhancement and halftoning processing, the visual quality has significant improved and overcame the weakness of low resolution.

[1] I. Ota, J. Ohnishi, and M. Yoshiyama, “Electrophoretic image display (EPID) panel,” Proc. IEEE, vol. 61, no. 7, pp.832-836, July 1973.
[2] M. A. Hopper and V. Novotny, "An electrophoretic display, its properties, model, and addressing," IEEE Trans. Electron Devices, vol. 26, no. 8, pp.1148-1152, Aug. 1979.
[3] B. Fitzhenry-Ritz, "Optical properties of electrophoretic image displays,” IEEE Trans. Electron Devices, vol. 28, no. 6, pp.726-735, June 1981.
[4] B. Comiskey, J. D. Albert, H. Yoshizawa, and J. Jacobson, “An electrophoretic ink for all-printed reflective electronic display,” Nature, vol. 394, pp. 253 - 255, July 1998.
[5] R. C. Liang, J. Hou, H. Zang, J. Chung, and S. Tseng, "Microcup displays: electronic paper by roll-to-roll manufacturing processes," Journal of SID, vol. 11, no. 4, pp. 621-628, Apr. 2003.
[6] T. Bert and H. D. Smet, “Dielectrophoresis in electronic paper,” Displays, vol. 24, pp. 223-230, 2004.
[7] Y. Chen, J. Au, P. Kazlas, A. Ritenour, H. Gates, and M. McCreary, “Flexible active-matrix electronic ink display,” Nature, vol. 423, pp. 136, May 2003.
[8] K. J. Allen, “Reel to real:prospects for flexible displays,” Proc. IEEE, vol. 93, no. 8, pp. 1394 – 1399, Aug., 2005.
[9] T. Bert and H. D. Smet, “The microscopic physics of electronic paper revealed,” Displays, vol. 24, pp. 103-110, 2003.
[10] A. Monté, J. Doutreloigne, and A. V. Calster, "Driving-scheme algorithms for intelligent energy-efficient high-voltage display drivers," IEEE Trans. Circuits and Systems-I: Regular Paper, vol. 56, no. 2, pp. 497 - 507, 2009.
[11] H. Gates, R. Zehner, H. Doshi, and J. Au, “A5 sized electronic paper display for document viewing,” in Proc. SID 05 Digest, 2005, pp. 1214 – 1217.
[12] Y. Komatsu, H. Kawai, T. Kodaira, S. Hirabayashi, M. Miyasaka, S. Nebashi, and T. Shimoda, "A flexible 7.1-in. active-matrix electrophoretic display," in Proc. SID 06 Digest, 2006, pp. 1830-1833.
[13] A. Henzen, J. Kamer, T. Nakamura, T. Tsuji, M. Yasui, M. Pitt, G. Duthaler, K. Amundson, H. Gates, and R. Zehner, “Development of active-matrix electronic-ink displays for handheld devices,” Journal of SID, vol. 12, no. 1, pp. 17-22, Jan. 2004.
[14] H. Kodama and K. Takeshita, “Computational modeling of pigment dispersions,” in Proc. SID 05 Digest, 2005, pp. 1670 – 1673.
[15] T. Bert, H. D. Smet, F. Beunis, and K. Neyts, “Complete electrical and optical simulation of electronic paper,” Displays, vol. 27, pp. 50-55, 2006.
[16] M. T. Johnson, G. Zhou, R. Zehner, K. Amundson, A. Henzen, and J. Kamer, "High-quality images on electrophoretic displays," Journal of SID, vol. 14, no. 2, pp. 175 - 180, Feb. 2006.
[17] H. Kawai, M. Miyasaka, A. Miyazaki, T. Kodaira, S. Inoue, T. Shimoda, K. Amundson, R. J. Paolini Jr., M. McCreary, and T. Shimoda, “A flexible 2-in. QVGA LTPS-TFT electrophoretic display,” in Proc. SID 05 Digest, 2005, pp. 1638 – 1641.
[18] K. Amundson and T. Sjodin, "Achieving graytone images in a microencapsulated electrophoretic display," in Proc. SID 06 Digest, 2006, pp. 1918 – 1921.
[19] S. Inoue, H. Kawai, S. Kanbe, T. Saeki, and T. Shimoda, “High-resolution microencapsulated electrohoretic display (EPD) driven by poly-Si TFTs with four-level grayscale,” IEEE Trans. Electron Devices, vol. 49, no. 8, pp.1532-1539, Aug. 2002.
[20] R. Zehner, K. Amundson, A. Knaian, B. Zion, M. Johnson, and G. Zhou, “Drive waveforms for active matrix electrophoretic displays,” in Proc. SID 03 Digest, 2003, pp. 842- 845.
[21] M. Aprea, “Enabling Small-Format Electronic Paper in Smart Surface”, SID09, 2009, pp. 26－31.
[22] H. Gates and T. Ohkami, "High performance active electronic display controller," in Proc. SID 08 Digest, 2008, pp. 693 – 696.
[23] H. Gates, T. Ohkami, and J. Au, "Improved electronic controller for image stable displays," in Proc. SID 06 Digest, 2006, pp. 1406- 1409.
[24] W. C. Kao, J. A. Ye, F. S. Lin, P. Y. Cheng, and R. Sprague, "Configurable timing controller design for active matrix electrophoretic display," IEEE Trans. Consumer Electronics, vol. 55, no. 1, pp. 1 - 5, Feb. 2009.
[25] B. Lippel and M. Kurland, “The effect of dither on luminance quantization of pictures,” IEEE Trans. Commun. Technol, vol. 19, no. 6, pp. 879 – 888, 1971.
[26] P. W. Besslich, "Comments on electronic techniques for pictorial image reproduction," IEEE Trans. Commun., vol. 31, no. 6, pp. 846 - 848, 1983.
[27] W. C. Kao, J. A. Ye, M. I Chu, and C. Y. Su, “Image quality improvement for electrophoretic displays by combining contrast enhancement and halftoning techniques,” IEEE Trans. Consumer Electronics, vol. 55, no. 1, pp. 15 - 19, Feb. 2009.
[28] R. W. Floyd and L. Steinberg, “An adaptive algorithm for spatial grayscale,” in Proc. SID, 1976, vol. 17, no. 2, pp. 75-77.
[29] Z. J. Liu, Z. H. Liang, and C. L. Liu, “3-dimensional error diffusion method based on edge detection for digital display devices,” IEEE Trans. Consumer Electronics, vol. 53, no. 2, pp. 239 – 242, 2007.
[30] W. C. Kao, “High Dynamic Range Imaging by Fusing Multiple Raw Images and Tone Reproduction,” IEEE Trans. Electron Devices, vol. 54, no. 1, pp.10 - 15, Feb. 2008.
[31] R. W. Floyd and I. Steinberg, “An adaptive algorithm for spatial grayscale,” Proc. SID, vol. 17, no. 2, pp. 75–78, 1976.
[32] J. F. Jarvis, C. N. Judice, and W. H. Ninke, “A survey of techniques for the display of continuous-tone pictures on bilevel displays,” Comput. Graph. Image Process, vol. 5, pp. 13–40, 1976.
[33] P. Stucki, “Mecca—A multiple-error correcting computation algorithm for bi-level image hardcopy reproduction,” Tech. Rep. RZ1060, IBM Res. Lab., Zurich, Switzerland, 1981.
[34] X. Li, “Edge-directed error diffusion halftoning,” IEEE Signal Processing Letters, vol. 13, no. 11, pp. 688 – 690, 2006.
[35] Wen-Chung Kao, “Electrophoretic display controller integrated with real-time halftoning and partial region update,” IEEE/OSA Journal of Display Technology, vol. 6, no. 1, pp. 36 - 44, Feb. 2010.
[36] Jack Hou, Sergey Shokhor, and Sylvain Naar "Active Matrix Electrophoretic Displays Containing Black and White Particles with Opposite Polarities," in Proc. SID 01 Digest, 2001, pp. 164 – 167.