簡易檢索 / 詳目顯示

回結果列表
研究生： 郭毓泰
Yu-Ti Kuo
論文名稱： 縮小化光子能隙微帶結構應用在雙向電光網路分析儀探頭之研製
Study and Fabrication of Bilateral Electro-Optic Probes for Lightwave Network Analyzer Using Compact PBG Microstrip Structures
指導教授： 曹士林
Tsao, Shyh-Lin
學位類別： 碩士
Master
系所名稱： 光電工程研究所
Graduate Institute of Electro-Optical Engineering
論文出版年： 2008
畢業學年度： 96
語文別： 中文
論文頁數： 62
中文關鍵詞： 分頻多工器 、環型器 、微波光子能隙 、雙向量測
英文關鍵詞： Frequency Division Multiplexer, Circulator, Microwave Photonic Band-gap, Two-way Measurement Technique
論文種類： 學術論文
相關次數： 點閱：213  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本文提出一種頻寬由0.9 GHz到9 GHz的雙向光頻域量測分析儀之探頭，此種探頭的電路部份是由一種縮小型微波光子晶體結構所構成。所提出的縮小型微波光子晶體結構可適合地實現低通與帶通濾波器，更改善原本微波光子晶體佔據大面積的問題。利用此電路實現雙向電光元件量測探頭，配合微波網路分析儀，可應用於雙向光元件的量測，這對快速量測光元件之S參數頻率響應有很大的助益。

    In this thesis, we proposed a bilateral electro-optic probe used in two-way optical frequency domain measurement network analyzer. The bandwidth of proposed electro-optic probe is from 0.9 GHz to 9 GHz. Using compact microwave photonic band-gap structure to implement the circuit part of electro-optic probe, a large size of microwave circuit can be reduced, and it also can applied to fabricate low-pass and band-pass filters. Combined this electro-optic probe proposed in this thesis with commercialized vector network analyzer, we can measure the S-parameters of optical devices with fast two-way measurement.

    Contents Chinese Abstract i English Abstract ii Acknowledgement iii Contents iv List of Figures vii Chapter 1 Introduction 1 1.1 Research Motives and Background 1 1.2 Dissertation Structure 3 Chapter 2 LPF with Compact Microwave PBG Structure 4 2.1 PBG Low Pass Filter 4 2.2 Compact Microwave PBG Structure 6 2.2.1 Equivalent Circuit Models 7 2.2.2 Simulated Results of S-parameters 7 2.2.2.1 Compact PBG Unit Cell 7 2.2.2.2 Two-stage CM-PBG 8 2.3 Implementation of CM-PBG Structure 8 2.3.1 CM-PBG Low Pass Filter 8 2.3.2 Two Stage CM-PBG Low Pass Filter 9 2.4 Summary ..10 Chapter 3 CM-PBG Frequency Division Multiplexer 16 3.1 3~8.5 GHz CM-PBG Band-pass Filter 17 3.1.1 Equivalent Circuit Model of CM-PBG BPF 17 3.1.2 Enhanced Bandwidth CM-PBG BPF 18 3.2 8.5~15 GHz CM-PBG High-pass Filter 18 3.2.1 Model of 8.5~15 GHz CM-PBG HPF 19 3.2.2 Enhanced Selectivity of Compact PBG Filter 19 3.3 Experimental Results of CM-PBG Filter 20 3.4 Implementation of CM-PBG FDM 20 3.5 Summary 21 Chapter 4 Bilateral Electro-Optic Probes 31 4.1 Microwave Circulator 31 4.1.1 Theoretical Model 31 4.1.2 Experimental Results 35 4.2 Two-way Optical Frequency Domain Measurement 35 4.3 Bilateral Electro-Optic Probes 39 4.3.1 Wideband Microwave Circulator 39 4.3.2 Optical Transmitter, Optical Circulator, and Optical Receiver 39 4.3.3 Experimental Results of Electro-Optical probe 40 4.4 Summary 41 Chapter 5 Conclusions 55 References 57 Publication Lists x List of Figures Fig. 2–1 The conventional PBG structure 11 Fig. 2–2 The LPF using conventional PBG structure 11 Fig. 2–3 The proposed CM-PBG structure 11 Fig. 2–4 Equivalent circuit of CM-PBG 12 Fig. 2–5 Simulated insertion loss with different Cg value. 12 Fig. 2–6 Simulated return loss with different Cg value 13 Fig. 2–7 Two-stage CM-PBG LPF 13 Fig. 2–8 Equivalent circuit of two-stage CM-PBG LPF 14 Fig. 2–9 Simulated S-parameters of two-stage CM-PBG LPF 14 Fig. 2–10 The measured S-parameters of CM-PBG unit cell 15 Fig. 2–11 The measured S-parameters of two-stage CM-PBG LPF 15 Fig. 3–1 The first proposed CM-PBG BPF 22 Fig. 3–2 Equivalent circuit model of the first CM-PBG BPF 22 Fig. 3–3 EM simulated results of first CM-PBG BPF 23 Fig. 3–4 Enhanced bandwidth structure of CM-PBG BPF 23 Fig. 3–5 Equivalent circuit model of enhanced bandwidth CM-PBG BPF 24 Fig. 3–6 Simulated S parameters of enhanced bandwidth CM-PBG BPF 24 Fig. 3–7 Layout of the CM-PBG HPF 25 Fig. 3–8 Equivalent circuit model of the CM-PBG HPF 25 Fig. 3–9 Simulated results of the CM-PBG HPF 26 Fig. 3–10 (a)Layout of the second CM-PBG BPF with three-stage structure. (b) The first CM-PBG. (c) The second CM-PBG 27 Fig. 3–11 Simulated results of the CM-PBG HPF with three-stage structure 28 Fig. 3–12 Measured frequency responses of CM-PBG BPF 28 Fig. 3–13 Predicted results of proposed CM-PBG FDM 29 Fig. 3–14 The layout of CM-PBG FDM 29 Fig. 3–15 Measured frequency responses of CM-PBG FDM 30 Fig. 4-1 Equivalent circuit of microwave circulator 3A3BQ 43 Fig. 4–2 Equivalent circuit of microwave circulator M3C4080 43 Fig. 4–3 Experimental setup for measuring frequency response of microwave circulator 44 Fig. 4–4 The measured results of microwave circulator 3A3BQ 44 Fig. 4–5 The measured results of microwave circulator M3C4080 45 Fig. 4–6 The measured results of microwave circulator SR0812C21 45 Fig. 4–7 Block diagram of two-way optical frequency domain reflection/transmission system 46 Fig. 4–8 Block diagram of proposed two-way electrooptic probe 47 Fig. 4–9 Block diagram for measuring wideband CM-PBG FDM 48 Fig. 4–10 (a) S-parameters of each output signal. (b) The measured results of wideband CM-PBG FDM 49 Fig. 4–11 The photograph of the wideband microwave circulator 49 Fig. 4–12 Experimental setup of optical transmitter 50 Fig. 4–13 Experimental results of optical transmitter 50 Fig. 4-14 Experimental setup of optical transmitter cascades optical circulator 51 Fig. 4–15 Experimental result of optical transmitter cascades optical circulator 51 Fig. 4-16 Block diagram of measuring two-way electrooptic probe 52 Fig. 4–17 Experimental result of electro-optic probe 53 Fig. 4–18 The photograph of the electro-optic probe 53 Fig. 4–19 Bilateral electro-optic probes 54

    Reference

    [1] D. D. Curtis and E. E. Ames, “Optical test set for microwave fiber-optic network analysis,” IEEE Transactions on Microwave Theory and Techniques, vol. 38, no. 5, pp. 552–559, May 1990.
    [2] J. J. Pan, “Microwave optics for space and ground communications,” Telesystems Conference 1993 National Conference Proceedings, Commercial Applications and Dual-Use Technology, vol. 16, no. 17, pp. 1–6, June 1993.
    [3] G. Yu, W. Zhang and J. A. R. Williams, “High-Performance microwave transversal filter using fiber Bragg grating arrays,” IEEE Photonics Technology Letters, vol. 12, no.9, pp. 1183–1185, September 2000.
    [4] J. Yao and Q. Wang, “Photonic microwave bandpass filter with negative coefficients using a polarization modulator,” IEEE Photonics Technology Letters, vol. 19, no. 9, pp. 644–646, May 2007.
    [5] B. Vidal, M. Á. Piqueras, and J. Martí, “Direction-of-arrival estimation of broadband microwave signals in phased-array antennas using photonic techniques,” IEEE/OSA Journal of Lightwave Technology, vol. 24, no. 7, pp. 2741–2745, July 2006.
    [6] G. J. Pendock, M. J. L. Cahill, and D. D. Sampson, “Multi-gigabit per second demonstration of photonic code-division multiplexing,” Electronics Letters, vol. 31, no. 10, pp. 819–820, May 1995.
    [7] W. R. Peng, P. C. Peng, W. P. Lin, K. C. Hsu, Y. C. Lai, and S. Chi, “A cost-effective fast frequency-hopped code-division multiple-access light source using self-seeded fabry-Pérot laser with fiber Bragg grating array,” IEEE Photonics Technology Letters, vol. 16, no. 11, pp. 2550–2552, November 2004.
    [8] Y.-T. Kuo, W.-C. Lee, and S.-L. Tsao, “FBG frequency response measurement by two-way optical frequency domain reflection/transmission technique.” Optics and Photonics in Taiwan, Hsin-chu, Taiwan, 2006.
    [9] W.-C. Lee and S.-L. Tsao, “A novel combination of PBG cell for achieving HPF, BPF, and LPF in an electro-optic system,” Proceeding of the 49th SPIE’s Annual Meeting, Colorado, Denver U.S.A. vol. 5511, pp. 173–181, 2004.
    [10] W.-C. Lee and S.-L. Tsao, “A novel CPW frequency division multiplexer using PBG cell combination,” Proceeding of Symposium on Technology Fusion of Optoelectronics and Communications (STFOC ’05), Taiwan, pp. 43–44, 2005.
    [11] K. P. Ma, J. Kim, F. R. Yang, Y. Qian, and T. Itoh, “Leakage suppression in stripline circuit using a 2-D photonic bandgap lattice,” IEEE MTT-S Int. Microwave Symp. Dig., vol. 1, pp. 73–76, June 1999.
    [12] F. R. Yang, K. P. Ma, Y. Qian, and T. Itoh, “A novel TEM waveguide using compact photonic-bandgap (UC-PBG) structure,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, pp. 2092–2098, November 1999.
    [13] J. Sor, Y. Qian, and T. Itoh, “Miniature low-loss CPW periodic structures for filter applications,” IEEE Transactions on Microwave Theory and Techniques, vol. 49, no. 12, pp. 2336–2341, December 2001.
    [14] F. R. Yang, K. P. Ma, Y. Qian, and T. Itoh, “A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit,” IEEE Transactions on Microwave Theory and Techniques, vol. 47, no. 8, pp. 1509–1514, August 1999.
    [15] V. Radisic, Y. Qian, R. Coccioli, and T. Itoh, “Novel 2-D photonic bandgap structure for microstrip lines,” IEEE Microwave and Guided Wave Letter, vol. 8, no. 2, pp. 69–71, February 1998.
    [16] Q. Xue, K. M. Shum, and C. H. Chan, “Novel 1-D microstrip PBG cells,” IEEE Microwave and Guided Wave Letters, vol. 10, no. 10, pp. 403–405, October 2000.
    [17] B. Q. Lin, Q. R. Zheng, and N. C. Yuan, “A novel planar PBG structure for size reduction,” IEEE Microwave and Wireless Components Letters, vol. 16, no. 5, pp. 269–271, May 2006.
    [18] M. L. Ha and Y. S. Kwon, “Ku-band stop filter implemented on a high resistivity silicon with inverted microstrip line photonic bandgap (PBG) structure,” IEEE Microwave and Wireless Components Letters, vol. 15, no. 6, pp. 410–412, June 2005.
    [19] S. Y. Huang and Y. H. Lee, “Tapered dual-plane compact electromagnetic bandgap microstrip filter structures,” IEEE Transactions on Microwave Theory and Techniques, vol. 53, no. 9, pp. 2656–2664, September 2005.
    [20] S. Y. Huang and Y. H. Lee, “Compact U-shaped dual planar EBG microstrip low-pass filter,” IEEE Transactions on Microwave Theory and Techniques, vol. 53, no. 12, pp. 3799–3805, December 2005.
    [21] L. H. Hsieh and K. Chang, “Compact elliptic-function low-pass filters using microstrip stepped-impedance hairpin resonators,” IEEE Transactions on Microwave Theory and Techniques, vol. 51, no. 1, pp. 193–198, January 2003.
    [22] Mariá del Castillo Velázquez-Ahumada, J. Martel, and F. Medina, “Design of compact low-pass elliptic filters using double-sided MIC technology,” IEEE Transactions on Microwave Theory and Techniques, vol. 55, no. 1, pp. 121–127, January 2007.
    [23] 李文卿，雙向光頻域反射與穿透技術之研究，碩士論文，國立臺灣師範大學光電科技研究所，臺北，2005。
    [24] C. E. Saavedra, “Microstrip multiplexer with compact in-line feed structure,” Microwave and Optical Technology Letters, vol. 49, no. 12, pp. 3128–3130, December 2007.
    [25] M. H. Weng, C. Y. Hung, and Y. K. Su, “A hairpin line diplexer for direct sequence ultra-wideband wireless communication,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 17, pp. 519–521, July 2007.
    [26] C. Y. Hung, M. H. Weng, Y. K. Su, R. Y. Yang, and H. W. Wu, “Design of sharp-rejection, compact, and low-cost ultra-wideband bandpass filters using interdigital resonators,” Microwave and Optical Technology Letters, vol. 48, no. 10, pp. 2093–2096, October 2006.
    [27] V. Zhurbenko, V. Krozer, and P. Meincke, “Miniature wideband filter based on coupled-line sections and quasi-lumped element resonator,” Microwave and Optical Technology Letters, vol. 49, no. 9, pp. 2076–2079, September 2007.
    [28] C. Y. Hung, M. H. Weng, R. Y. Yang, and H. W. Wu, “Design of the compact parallel coupled wideband bandpass filter with very high selectivity and wide stopband,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 7, pp. 510–512, July 2007.
    [29] P. Mondal, M. K. Mandal, and A. Chakrabarty, “Compact Ultra-Wideband Bandpass Filter With Improved Upper Stopband,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 9, pp. 643–645, September 2007.
    [30] Joan García-García, J. Bonache, and F. Martín, “Application of Electromagnetic Bandgaps to the Design of Ultra-Wide Bandpass Filters With Good Out-of-Band Performance,” IEEE Transactions on Microwave Theory and Techniques, vol. 54, no. 12, pp. 4136–4140, December 2006.
    [31] N. W. Chen and K. Z. Fang, “An Ultra-Broadband Coplanar-Waveguide Bandpass Filter With Sharp Skirt Selectivity,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 2, pp. 124–126, February 2007.
    [32] R. Li and L. Zhu, “Ultra-Wideband (UWB) Bandpass Filters With Hybrid Microstrip_Slotline Structures,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 11, pp. 778–780, November 2007.
    [33] S. Sun, L. Zhu, and H. H. Tan, “A Compact Wideband Bandpass Filter Using Transversal Resonator and Asymmetrical Interdigital Coupled Lines,” IEEE Microwave and Wireless Components Letters, vol. 18, no. 3, pp. 173–175, March 2008.
    [34] J. W. Baik, D. H. Hyun, J. Jeong, and Y.-S. Kim, “Compact ultra-wideband bandpass filter using uniplanar compact photonic bandgap structure,” Microwave and Optical Technology Letters, vol. 49, no. 9, pp. 2122–2123, September 2007.
    [35] J. W. Baik, D. H. Hyun, G. N. Kim, and Y.-S. Kim, “Novel ultra-wideband bandpass filter using DUC-EBG unit cell,” Microwave and Optical Technology Letters, vol. 49, no. 12, pp. 3134–3136, December 2007.
    [36] P. K. Singh, S. Basu, and Y. H. Wang, “Planar Ultra-Wideband Bandpass Filter Using Edge Coupled Microstrip Lines and Stepped Impedance Open Stub,” IEEE Microwave and Wireless Components Letters, vol. 17, no. 9, pp. 649–651, September 2007.
    [37] S. Pollitt, “Standards to support lightwave communications,” Precision Electromagnetic Measurements, pp. 495, 1994.
    [38] A. P. Freundorfer, “A coherent optical network analyzer,” IEEE Photonics Technology Letters, vol. 3, no. 12, pp. 1139–1142, December 1991.

    無法下載圖示 本全文未授權公開
    QR CODE