本研究主要合成兩種高分子，並探討其對鈦酸鋇漿體的分散效果，並和商用分散劑聚甲基丙烯酸銨鹽(PMAAN)做比較。
首先合成兩種高分子，一為α-(N,N-二甲基-N-(3-(β-羧基)丙烯氨)丙基)/丙烯醯胺共聚物(PDAE)，一為4羧基氨基-4酮基-2-丁烯酸/丙烯醯胺共聚物(PCOB)。PDAE係以β-羧基-N-(3-二甲基氨丙基)丙烯醯胺和氯醋酸鈉反應生成β-羧基-N-(3-二甲基氨丙基-N-乙酸鈉)丙烯醯胺單體，再與丙烯醯胺經自由基反應而得。PCOB係以馬來酸酐和氨基甲酸銨鹽反應生成4羧基氨基-4酮基-2-丁烯酸銨鹽單體，再與丙烯醯胺經自由基反應而得。合成之PDAE與PCOB均以H1-NMR與IR確認其結構。
其次，以黏度法、沉降法、粒子之粒徑分佈、表面電位量測及掃描式電子顯微鏡(SEM)來評估各分散劑的分散效果。結果顯示PDAE、 PCOB比PMAAN可以更有效地分散漿體中鈦酸鋇粒子，同時漿體中鋇離子的溶出量明顯較少，主要的原因是PDAE、 PCOB有較多吸附於鈦酸鋇粉體表面，得以吸附/結合較多的鋇離子。添加PDAE或PCOB的鈦酸鋇漿體製成的生胚有較大的密度，而燒結後之胚體，其介電常數值較高，介電損失較低，及燒結胚體密度也較大；顯示PDAE與PCOB兩者對鈦酸鋇粉末的分散性能優於PMAAN。

This study has prepared two polymers and evaluated their dispersion properties on BaTiO3 slurries. The results were compared to those by a commercial dispersant, i.e., ammonium salt of polymethylacrylic acid (PMAAN).
First, two polymers have been made. One is poly(α-(N,N-dimethyl- N- (3-(β-carboxylate)acrylamino)propyl)ammonium ethanate-acrylamide) (PDAE), which was prepared from β-carboxylate-N-(3-dimethylamino propyl -N-acryloxyethyl) acrylamide and acrylamide through a free
radical copolymerization. β-carboxylate-N-(3-dimethylamino propyl –N -acryloxyethyl)acrylamide was made by reacting β-carboxylate -N- (3- dimethylaminopropyl) acrylamide with sodium chloroacetate. Another is poly(4-carboxyamino-4-oxo-2-butene) acrylamide (PCOB), which was prepared from 4-carboxyamino-4-oxo-2-butene and acrylamide through a free radical copolymerization. 4-carboxyamino-4-oxo-2-butene was made by reacting maleic anhydride with ammonium carbamate. The chemical structures of PDAE and PCOB have been identified and confirmed by their H1-NMR and IR spectra.
Second, the dispersion properties of each dispersant have been evalu- ated by the viscosity, sedimentation height, particle size distribution, and zeta potential, and through SEM observations. The results indicate that both PDAE and PCOB show better dispersion effects on the BaTiO3 pow- der in aqueous slurries than PMAAN. They also causes less Ba2+ ions to be dissolved into solutions, for greater amount of either PDAE or PCOB adsorbed on BaTiO3 particles and more Ba2+ ions also adsorbed. The resulting green parts with either PDAE or PCOB show greater density, and the sintered parts have higher dielectric constant, lower dielectric loss, and greater density. Thus, both PDAE and PCOB exhibit better dispersion properties than PMAAN.

1.G. Y. Carlos, B. R. Heberto, and M. Froylan, “Colloidal processing of BaTiO3 using ammonium polyacrylate as dispersant, ”Ceramics International, 26, 609-616 (2000).
2. K. Mikeska, and W. R. Cannon, “Advances in Ceramics, ” J. Am. Ceram. Soc., 165-183 (1984).
3. J. H Jean, and H. R. Wang, “Dispersion of Aqueous Barium Titanate Suspensions with Ammonium Salt of Poly(methacrylic acid), ” J. Am. Ceram. Soc., 81 [6] 1589-99 (1998).
4.李鴻銘,“異性兩性苯乙烯—馬來酸酐共聚合物之合成與特性,” 成大化工所碩士論文, 1995.
5. A. W. M. de Laat, and W. P. T. Derks, “Colloidal Stabilization of BaTiO3 with Poly (vinyl alcohol) in Water, ” Colloids Surf. A., 71,147-53 (1993).
6.Vis. Kumar, “Solution-Precipitation of Fine Powders of Barium Titanate and Strontium Titanate, ” J. Am.Ceram. Soc., 82 [10] 2580 -84 (1999).
7.王惠民,“兩性高分子對黏土粒子行為之影響”, 成大化工所碩士論文, 1994.
8. J. Cesarano, and I. A. Aksar, “Stability of Aqueous Al2O3 Sjuspensions with PolyCmethacrylic acid) Polyelectrolyte”, J. Am. Ceram. Soc., 71 [4] 250-55 (1988).
9. C.C. Shih, and H.M. Hon, “Stabilization of aqueous Si3N4 suspensions with ammonium salt of poly(acrylic acid) at various pH, ”Mater. Chem. Phys., 57, 125-33 (1998).
10. Z. C. Chem., T. A. Ring, and J. Lemaitre, “Stabilization and Processing of Aqueous BaTiO3 Suspensions with Polyacrylic Acid, ” J. Am. Ceram. Soc., 75 [12] 3201-208 (1992).
11.吳玉祥,“鈦酸鋇製程與結晶構造分析之研究, ”台大材料所博士論文,1994.
12. K. Kudaka, K. Iizumi, and K. Sasaki, “Preparation of Stoichiometric Barium Titanyl Tetahydrate, ” J. Am. Ceram. Soc., Bull., 61 [11] 1236 (1982).
13. K.S. Mazdiyasni, and L. M. Brown, “Synthesis of Nb2O5-Doped with BaTiO3 Improved Electrical Properties, ” J. Am. Ceram. Soc., 55[12] 633 -34 (1972).
14. K.S. Mazdiyasni, “Fine Particle Peroveskite Processing, ”J. Am. Ceram. Soc. Bull., 63 [4] 591-94 (1984).
15. W.J. Dawson, “Hydrothermal Synthesis of Adianced Ceramic Pow- ders, ”J. Am. Ceram. Soc. Bull., 67 [10] 1673-78 (1988).
16.翁震良,“釵酸鋇及鈦酸鋇/鎳複合材料可靠度及電性之研究,” 台大材料所碩士論文,2000.
17. M.Hillert, “On the Theory of Normal and Abnormal Grain Growth,” Acta Metall., 13 [3] 227-38 (1965).
18. G. Arlt, and D. Hennings, “Dielectric Properties of Fine-Grained Barium Titanate, ” J. Appl. Phys., 58, 1619-25 (1985).
19. A. Yainaji, Y. Enomoto, K. Kinoshita, and T. Murakami, “Preparation, Characterization, and Properties of Dy-Doped Small-Grained BaTiO3 Ceramics, ” J. Am. Ceram. Soc., 60 [3-4] 97-101 (1977).
20. M. Kahn, “Influence of Grain Growth on Dielectric Properties of Nb -Doped BaTiO3, ” J. Am. Ceram. Soc., 54 [9] 455-57 (1971).
21. G.D. Parfitt, “Dispersion of Powders in Liquids”, 3rd. ed. Applied Science Publishers, Inc., New Jersey (1981).
22. D.H. Napper, “Polymeric Stabilization of Colloidal Dispersions, ” Academic Press Inc., San Diego (1983).
23. R.H. Ottewill, J. Colliod Interface Sci., 58, 357 (1977).
24. J. TH, G. Overbeed, J. Colloid Interface Sci., 58, 408 (1977).
25. T. Sato, and R. J. Ruch, “Stabilization of Colloid Dispersions by Polymer Adsorption, ” Marcel Dekker, Inc., New York (1980).
26. D.H. Napper, J. Colloid Interface Sci., 58, 390 (1977).
27. W. Heller, T.L. Pugh, J. Polymer Sci., 67, 203 (1960).
28. B. Vincent, Advanced in Colloid and Interface Science, 4, 193-277 (1974).
29. E.D. Goddard, and B. Vincent, “Polymer Adsorption and Dispersion Stability, ” ACS Symposium series, 240, Washinton, D.C. (1984).
30. Th. F. Tadros, “The Effect of Polymer on Dispersion Properties, ” Academic Press, London (1982).
31. I. Piirma, “Polymer Surfactants, ” Marcel Dekker Inc., New York (1992).
32. J. M. H. M. Schentijens, G. J. Fleer, J. Phys. Chem., 83,1619 (1979).
33. T. C. Patton, J. Paint Technol., 42 (551), 666 (1970).
34. M.J. Rosen, “Surfactants and Interfacial Phenomena, ” John Wiley and Sons. Inc., New York (1978).
35. G. D. Botsaris, and Y. M. Glazman, “Interfacial Phenomena in Coal Technology, ” Marcel Dekker, New York (1989).
36. S.L. Rosen, “Fundamental Principles of Polymeric Materials, ” John Wiley and Sons., New York (1982).
37.賴建吉,“親油基或親水基改良之馬來酸酐共聚合物之合成與其效果,”成大化工所碩士論文,1992.
38. R. Darby, B. Rogers, A. I. Ch. E. Journal, 26, 310 (1980).
39. H.L. Cohen, J. Polym. Sci. Chem. Ed. 14 (1), 7 (1988).
40. L. Charles, M. Cormick, C. B. J ohnson, “Macromolecules, ”21 (3), 686 (1988).
41.虞邦英,“鈦酸鋇膠粒於水基溶液中之表面吸附及分散研究,” 台大材料所碩士論文,2001.
42.C.W.Chang, “Dissolution of Ba2+ and Its Effect on Dispersion Behavior of Aqueous BaTiO3 Suspension, ” 清大材料所碩士論文.
43.D. A. Anderson, J. H. Adair, D. Miller, J. V. Biggers, and T. R. Shrout, “Surface Chemistry Effects on Ceramic Processing of BaTiO3 Powder, ” pp485-92 in Ceramic Transactions,Vol.1,Ceramic Powder Science ⅡA,Edited by G. L. Messing, E. R. Fuller Jr., H. Hausner, American ceramic Society,Westerville,Ohio (1988).
44.C. J. Shih, B. H. Lung, and M. H. Hon, “Collidal processing of titanium nitride with poly-(methacrylic acid ) polyelectrolyte,” Materials Chem.and Phy.60,150-157(1999).
45.R. J. Hunter, “Zeta Potential in Colloid Science-Principles and Applications, ”Academic Press, London (1981).
46.A. Tsetsekou, C. Agrafiotis, and A. Milias, “Optimization of the rheological properties of alumina slurries for ceramic processing applications, PartⅠ：Slip-casting, ”J. Eur. Ceram. Soc., 21, 363-373 (2001).
47.J. H. D. Hampton, S. B. Savage, and R. A. L. Drew, “Experimental analysis and modeling of slip casting, ” J. Am. Ceram. Soc.,71(12), 1040- 1045 (1988).
48.R. Greenwod, and K. Kendall, “Selection of suitable dispersants for aqueous suspensions of zirconia and titania powders using acous tophoresis, ”J. Eur. Ceram. Soc.,19,479-488(1999).
49.M. C. Blanco-Lopez, B. Rand, and F. L. Riley, “The Property of Aqueous Phase Suspension of Barium Titanate, ” J. Eur. Ceram. Soc., 17,281- 287 (1997).
50.Y. Fukuda, T. Togahi, Y. Suzuki, M. Naito, and H. Kamiya, “Influence of additive content of anionic polymer dispersant on dense alumina suspension viscosity, ”Chem. Eng. Sci., 56, 3005-3010 (2001).
51.S. Biggs, “Steric and bridging forces between surfaces bearing adsorbed polymer : An atomic force microscopy study, ” Langmuir, 11 (1), 156-162 (1995).
52.T. J. Senden, C. J. Drummona, and P. Kekicheff, “Atomic force microsc opy : Imaging with elecyrical double layer interactions, ” Langmuir, 10, 358-362 (1994).
53.L. A. Xue, “Thermodynamic benefit of Abnormal Grain Growth in Pore Elimination During Sintering, ” J. Am. Ceram. Soc., 78 (8), 1536 -37 (1989).