“專家系統”（Expert System, ES）是具有高實用價值的綜合性學科，也在電腦科學進化史上扮演著極為重要的角色，所以常被列為主要的課程之一。本研究採用專家系統與知識庫系統的設計，運用於智慧型訓練與教育（Intelligence Computer-Assisted Instruction, ICAI），考量傳統氣壓實作迴路複雜、故障維修困難外，加上學習者人數多，教師難以充分指導每一位學習者的每一個操作，因而降低了學習成效。
系統設計用於氣壓實作之嵌入式專家系統設計，核心係以8051為基底之嵌入式系統晶片，運用專家系統CLIPS的推論結果建構知識規則庫、實驗配管規則庫、錯誤配管診斷規則庫，再將規則庫內容植入嵌入式系統晶片，做成智慧型嵌入式系統晶片，擔任硬體輔助教學的角色，系統晶片與實際氣壓實做配管服務平台結合，透過數位訊號擷取模組診斷學習者的配管過程，診斷與分析學習者的配管模式，提供學習者完善多層次之學習環境。
使用Silicon Laboratories所開發的嵌入式系統晶片為系統發展核心，提供具專家系統功能的氣壓實做教學平台，學習者透過氣壓實作實際配管服務面板(Reality Wiring Service Panel, RWSP)的數位訊號，偵測學習者實際配管情況，應用嵌入式系統晶片體積小、低耗能、穩定性高、處理速度快的特性來增加系統的真實性、互動性及智慧性，適時地提供輔助教師對學生在實驗過程中的隨時監控、引導、操作、示範，完成互動式氣壓實作訓練服務環境，突破傳統教學思維的範疇，不僅讓學習環境呈現多元化，也助於提昇學習成效。

Expert systems are knowledge-based systems that emulate expert thought to solve significant problems in a particular domain of expertise. The artificial intelligence represented by expert systems has evolved to be a very useful approach for problem solving. In this research, produces an Intelligence Computer-Assisted Instruction (ICAI) system for Pneumatics, including expert system and knowledge-based systems design. The real-based teaching systems harness the power of information technology to increase interaction between the teacher and the students, to promote individualized learning environments, and to improve the quality of teaching and learning.
In this research, Silicon Laboratories development is used as the system module. Its’ system kernel uses system on chip microprocessor for 8051 based. According to the expert system inference results, classify knowledge rule base, experiment rule base, and diagnosis rule base. Finally, those expert rules are embedded on microprocessor. The microprocessor properties are real time, interaction and intelligent reasoning. The function of the module in Reality Wiring Service Panel (RWSP) is to receive the signal from signal acquisition module. Students can practice and accustom to the operating and experimenting on this test-platform for the experiment study of pneumatic operation.
Following the requests of real-time, small-volume, low-loss, high- stability, this research develop an interaction and intelligence system for assist teachers to give a guidance and examples to students. Students could use and practice in the virtual wiring environment to achieve the practice purpose of skill learning.
Finally, this environment can monitor different kinds of wiring study, and it has the functions of real-time interaction, intelligent guidance and determination for wiring experiment on pneumatic. This system has enhances the efficiency of learning environment and the effectiveness of learning.

[1] Kin Wai Michael Siu, “Reconstructing the learning environment for the new needs in engineering training,” IEEE Engineering Science and Education Journal, pp.120-124.
[2] F. J. Jiménez-Leube, A. Almendra, C. González, and J. Sanz-Maudes, “Networked Implementation of an Electrical Measurement Laboratory for First Course Engineering Studies,” IEEE Transactions on Education, Vol. 44, No. 4, pp.377-383.
[3] 林家聖、馬南超、郭立平 及 賀嘉生(民91)，智慧型代理人於虛擬實驗環境下所提供的互動學習機制。資訊與教育雜誌，第86期，頁9-15。
[4] 曾煥雯(民90)，建構藍芽媒介之電機實驗互動教學系統。行政院國科會計畫成果報告NSC90-2520-S-003-014。
[5] 曾煥雯(民91)，新一代電機教學實驗室設計。行政院國科會計畫成果報告NSC91-2520-S-003-034。
[6] 曾煥雯(民93)，電腦輔助實驗技術學習環境設計。行政院國科會計畫成果報告NSC93-2520-S-003-016。
[7] 鄭才新(民95)，電機實驗之嵌入式專家系統設計與實現。國立臺灣師範大學工業教育學系碩士論文。
[8] 蔡昌均(民90)，電腦輔助教學專家系統中知識管理之研究。交大資訊科學系碩士論文。
[9] Fenton, B., Mcginnity, M., and Maquire, L., “Fault Diagnosis of electronic system using artificial intelligence,” Instrumentation and Measurement Magazine, IEEE, Vol. 5, Issue. 3, Sept 2002, pp.16-20.
[10] 邱群超(民91)，應用多媒體發展高職數位電路技能CAI軟體之研究。國立台北科技大學技職教育所碩士論文。
[11] G. W. Selnow, “Using interactive computer to communicate scientific information,” American Behavioval Scientist, Vol. 32, No. 2, pp. 124-135.
[12] T. K. Borsook and N. Higginbothamwheat, “What is it and what can it do for computer-based instruction?” Educational Technology, Vol. 3, No. 10, pp.11-17.
[13] J. G. Hedberg, B. Harper, and C. Brown, “Reducing cognitive load in multimedia navigation, Australian Journal of Educational Technology,” pp.157-181.
[14] 江文雄（民85），技術與職業教育概論。師大書苑。
[15] 謝銘勳(民90)，數位電路在虛擬實驗教室的教學評量模式。逢甲大學資訊工程學系碩士論文。
[16] Ding Wei-long, Xiong Fan-lun and Cheng Zhi-jun, “Study and implementation of the expert system for greenhouse tomato planting,” Information Technology and Applications, 2005. ICITA 2005, Third International Conference on Vol. 1, July 2005, pp.325-329.
[17] Huai Xiao-yong and Xiong Fan-lun,“Research on New Architecture Intelligent Systems and Its System Development Environment Visual XF6.1,” International Symposium on Intelligent Agriculture Information Technology (ISIAIT2000), Beijing, P. R. China, Dec 2000, pp.1-4.
[18] Su Yu, Zhao Hai, Su Wei-Ji, Wang Gang and Zhang Xiao-Dan, “Fuzzy reasoning based fault diagnosis expert system,” Proceedings of the 2004 IEEE International Conference on Networking, Sensing & Control, Taiwan, Vol. 1, March 2004, pp.613-617.
[19] 曾憲雄、黃國禎、江孟峰、蔡昌均 及 林耀聰（民91），專家系統導論工具應用。松崗圖書公司。
[20] Daniel Pop, Viorel Negru and Calin Sandru, “Expert system creator: A visual tool for expert systems construction,” Information Technology Interfaces, 2002. ITI 2002. Proceedings of the 24th International Conference on, Vol. 1, June 2002, pp.217-222.
[21] J. Giarratano and G. Riley, “Expert Systems: Principles and Programming,” PWS Publishing Company, Boston.
[22] Su Yu, Zhao Hai, Su Wei-Ji, Wang Gang and Zhang Xiao-Dan, “Fuzzy reasoning based fault diagnosis expert system,” Networking, Sensing and Control, 2004 IEEE International Conference on Vol. 1, March 2004, pp.613-617.
[23] Latchman, H. A., Salzmann, Ch., Gillet, D. and Bouzekri, H., “Information Technology Enhanced Learning in Distance and Conventional Education,” IEEE Transactions on Education, Vol. 42, Issue 4, Nov 1999, pp.247-254.
[24] 唐新民（民85），超音波入門及應用。無線電界雜誌社。
[25] 傅桭棻（民96），氣壓迴路設計。全華圖書。
[26] 胡志中（民91），液氣壓原理與迴路設計。全華圖書。