本論文之目標為設計智慧型控制系統以對葉片式氣動馬達伺服系統進行速度控制。在論文中，首先對氣動馬達之構造及運作原理進行討論，接著分析氣動馬達系統之數學動態，以推導出氣動馬達之標準二階狀態方程式。由於氣動馬達之動態特性及系統參數為高度非線性且時變，為了在既有的非線性特性及外部擾動情況下仍能達到高精準度之速度控制，本論文提出了基於比例積分微分型模糊類神經網路與適應性動態滑動模式兩種智慧型控制系統作為氣動馬達之速度控制器。最後，本論文以具32位元浮點數運算能力之數位訊號處理器TMS320F28335實現所提出的控制系統。實驗結果顯示以本論文所提出之兩種智慧型控制系統對氣動馬達均能達到有效之速度控制。

The object of this study is to design intelligent control systems for controlling the speed of a vane-type air motor (VAM) pneumatic servo system for tracking reference speed command. First, the structure and operating principles of the VAM servo system are introduced. Then, the dynamics of the VAM servo system is analyzed to derive the second order state equation of the VAM. Moreover, due to the dynamic characteristics and system parameters of the VAM servo system are highly nonlinear and time-varying, intelligent controllers control systems including proportional-integral-derivative-based fuzzy neural network (PID-based FNN) and adaptive dynamic sliding-mode control (ADSMC), are proposed to achieve precise speed control of VAM servo system under the occurrences of the inherent nonlinearities and external disturbances. Finally, a 32-b floating-point digital signal processor (DSP) TMS320F28335 was adopted for implementing the proposed control systems. The experimental results demonstrated the validities and advantages of the proposed PID-based FNN and ADSMC systems for the VAM servo system.

[1] Y. T. Shen and Y. R. Hwang, “Design and implementation of an air-powered motorcycles, ” Applied Energy, vol. 86, no 7-8, pp. 1105-1110, 2009.
[2] 李汯緯，“空氣/電動混合動力機車系統設計與實作驗證”，國立臺灣師範大學工業教育學系，碩士論文，2014。
[3] 張宏先，“內模控制應用於氣動馬達對雙軸平台定位控制”，國立中央大學機械工程學系，碩士論文，2012。
[4] S. R. Pandian, F. Takemura, Y. Hayakawa, and S. Kawamura, “Control performance of an air motor-can air motors replace electric motors?, ” IEEE International Conference on Robotics and Automation, Detroit, Michigan, vol. 1, pp. 518-524, 1999.
[5] L. Ma and K. Khorasani, “Constructive Feedforward Neural Networks Using Hermite Polynomial Activation Functions, ” IEEE Trans. Neural Networks, vol. 16, no. 4, pp.821-833, 2005.
[6] C. Pan, W. Chen, and Y. Yun, “Fault Diagnostic Method of Power Transformers Based on Hybrid Genetic Algorithm Evolving Wavelet Neural Network, ” IET Electr. Power Appl., Vol. 2, no. 1, pp. 71-76, 2008.
[7] L. Rutkowski, “Adaptive Probabilistic Neural Networks for Pattern Classification in Time-Varying Environment, ” IEEE Trans. Neural Networks, vol. 15, no. 4, pp. 811-827, 2004.
[8] H. Deng, R. Oruganti, and D. Srinivasan, “Neural Controller for UPS Inverters Based on B-Spline Network, ” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp.899-909, 2008.
[9] S. H. Ling, H. H. C. Iu, F. H. F. Leung, and K. Y. Chan, “Improved Hybrid Particle Swarm Optimized Wavelet Neural Network for Modeling the Development of Fluid Dispensing for Electronic Packaging, ” IEEE Trans. Ind. Electron., vol. 55, no. 9, pp.3447-3460, 2008.
[10] R. E. Precup, M. L. Tomescu, and S Preitl, “Lorenz System Stabilization Using Fuzzy Controllers, ” Int. J. of Computers, vol. Ⅱ, no. 3, pp. 279-287, 2007.
[11] S. Blazic, I. Skrjanc, and D. Matko, “Globally stable model reference adaptive control based on fuzzy description of the plant, ” Int. J. Syst. Sci., vol. 33, no. 12, pp. 995-1012, 2002.
[12] H. Li, H. Liu, H. Gao, and P. Shi, “Reliable Fuzzy Control for Active Suspension Systems With Actuator Delay and Fault, ” IEEE Trans. Fuzzy Syst., vol. 20, no. 2, pp. 342-357, 2012.
[13] M. Chadli and T.M. Guerra, “LMI Solution for Robust Static Output Feedback Control of Discrete Takagi–Sugeno Fuzzy Models, ” IEEE Trans. Fuzzy Syst., vol. 20, no. 6, pp. 1160-1165, 2012.
[14] H. Li, J. Yu, C. Hilton, and H. Liu, “Adaptive Sliding-Mode Control for Nonlinear Active Suspension Vehicle Systems Using T–S Fuzzy Approach,” IEEE Trans. Ind. Electron., vol. 60, no. 8, pp.3328-3338, 2013.
[15] W. Yu and X. Li, “Fuzzy Identification Using Fuzzy Neural Networks With Stable Learning Algorithms,” IEEE Trans. Fuzzy Syst., vol. 12, no. 3, pp. 411-420, 2004.
[16] F. J. Lin, H. J. Shieh, P. K. Huang, and L. T. Teng, “Adaptive control with hysteresis estimation and compensation using RFNN for piezo-actuator,” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 53, no. 9, pp. 1649-1661, 2006.
[17] F. J. Lin, P. H. Chou, C. S. Chen, and Y. S. Lin, “DSP-Based Cross-Coupled Synchronous Control for Dual Linear Motors via Intelligent Complementary Sliding Mode Control,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1061-1073, 2012.
[18] H. Chaoui, and P. Sicard,“Adaptive Fuzzy Logic Control of Permanent Magnet Synchronous Machines With Nonlinear Friction,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1123-1133, 2012.
[19] M. A. Khanesar, E. Kayacan, M. Teshnehlab, and O. Kaynak,“Extended Kalman Filter Based Learning Algorithm for Type-2 Fuzzy Logic Systems and Its Experimental Evaluation,” IEEE Trans. Ind. Electron., vol. 59, no. 11, pp. 4443-4455, 2012.
[20] G. D. Wu, and P. H. Huang,“A Vectorization-Optimization-Method-Based Type-2 Fuzzy Neural Network for Noisy Data Classification, ” IEEE Trans. Fuzzy Syst., vol. 21, no. 1, pp. 1-15, 2013.
[21] F. J. Lin, S. Y. Chen, L. T. Teng, and H. Chu, “Recurrent Functional-Link-Based Fuzzy Neural Network Controller With Improved Particle Swarm Optimization for a Linear Synchronous Motor Drive, ” IEEE Trans. Magnetics., vol. 45, no. 8, pp. 3151 - 3165, 2009.
[22] J. J. E. Slotine and W. Li, Applied Nonlinear Control.. Englewood Cliffs, NJ: Prentice-Hall, 1991.
[23] V. I. Utkin, “Sliding mode control design principles and applications to electric drives, ” IEEE Trans. Ind. Electron., vol. 40, no. 1, pp. 23-36, 1993.
[24] C. K. Lai and K. K. Shyu, “A novel motor drive design for incremental motion system via sliding-mode control method, ” IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 449-507, 2005.
[25] Z. Yan, C. Jin, and V. I. Utkin, “Sensorless Sliding-Mode Control of Induction Motors, ” IEEE Trans. Ind. Electron., vol. 47, no. 6, pp. 1286-1297, 2000.
[26] H. K. Khalil, Nonlinear Systems, 3rd ed. New Jersey, Upper Saddle River: Prentice Hall, 2002.
[27] J. P. Su and C. C. Wang, “Complementary sliding control of non-linear systems, ” Int. J. Control, vol. 75, no. 5, pp. 360-368, 2002.
[28] C. Y. Liang and J. P. Su, “A new approach to the design of a fuzzy sliding mode controller,” Fuzzy Sets and Systems, vol. 139, no. 1, pp. 111-124, 2003.
[29] GAST, http://www.gastmfg.com/product_detail.aspx?ProductID=297&ProductTypeID=29
[30] KAOLU, http://www.genndih.com/cht/highly-precision-regulation-control-air/500.html
[31] SpiraxSarco, http://www.spiraxsarco.com/global/tw/Products/Pages/Piston-Valves.aspx
[32] HONTKO, http://www.hontko.com.tw/htr-hm.htm
[33] Helistar, http://www.helistar.com.tw/big5/ie/pro_1.htm
[34] Unoair, http://www.huang-cheng.com.tw/pro2.html
[35] MCU&DSP, http://www.mcudsp.com.tw/
[36] F. J. Lin, R. J. Wai, and C. C. Lee, “Fuzzy neural network position controller for ultrasonic motor drive using push-pull DC-DC converter,” IEE Proc. Control Theory Appl., vol. 146, no. 1, pp. 99-107, 1999.